Have been working with Hospital Radio Chelmsford on their Axia Install. One of the desires was for the studios to operate with Myriad Playout the way it works when Myriad is plugged into the SRM mixer from P Squared.

They are using the Axia IP Audio Drivers which have built in GPIO and they had it working so the ‘next’ soft button fired off the player. What we have now programmed is if the fader is ‘off’ the player goes into Preview Mode. Preview is then removed when the fader goes ‘on’. This enables levels to be taken from the fader the audio from the log will come from without messing up the timing.

Here is the contents of the file should anyone else want to use it.

# Event constants:
# 0 ON
# 1 OFF
# 2 PREV
# 3 START
# 4 STOP
# For Element source type defined as a COMPUTER PLAYER
UDP_DSTPORT=6959
DEV0.0 COMMAND=”PLAYER PLAY 1″
#DEV0.1 COMMAND=”PLAYER PAUSE 1″
DEV0.3 COMMAND=”PLAYER PREVIEWMODE 1,CLEAR”
DEV0.4 COMMAND=”PLAYER PREVIEWMODE 1,FORCE”
DEV1.0 COMMAND=”PLAYER PLAY 2″
#DEV1.1 COMMAND=”PLAYER PAUSE 2″
DEV1.3 COMMAND=”PLAYER PREVIEWMODE 2,CLEAR”
DEV1.4 COMMAND=”PLAYER PREVIEWMODE 2,FORCE”
DEV2.0 COMMAND=”PLAYER PLAY 3″
#DEV2.1 COMMAND=”PLAYER PAUSE 3″
DEV2.3 COMMAND=”PLAYER PREVIEWMODE 3,CLEAR”
DEV2.4 COMMAND=”PLAYER PREVIEWMODE 3,FORCE”
DEV3.0 COMMAND=”PLAYER PLAY 4″
#DEV3.1 COMMAND=”PLAYER PAUSE 4″
DEV3.3 COMMAND=”PLAYER PREVIEWMODE 4,CLEAR”
DEV3.4 COMMAND=”PLAYER PREVIEWMODE 4,FORCE”
DEV4.0 COMMAND=”PLAYER PLAY 5″
DEV4.1 COMMAND=”PLAYER PAUSE 5″
DEV4.3 COMMAND=”PLAYER PLAY 5″
DEV4.4 COMMAND=”PLAYER PAUSE 5″
DEV5.0 COMMAND=”PLAYER PLAY 6″
DEV5.1 COMMAND=”PLAYER PAUSE 6″
DEV5.3 COMMAND=”PLAYER PLAY 6″
DEV5.4 COMMAND=”PLAYER PAUSE 6″
DEV6.0 COMMAND=”PLAYER PLAY 7″
DEV6.1 COMMAND=”PLAYER PAUSE 7″
DEV6.3 COMMAND=”PLAYER PLAY 7″
DEV6.4 COMMAND=”PLAYER PAUSE 7″
DEV7.0 COMMAND=”PLAYER PLAY 8″
DEV7.1 COMMAND=”PLAYER PAUSE 8″
DEV7.3 COMMAND=”PLAYER PLAY 8″
DEV7.4 COMMAND=”PLAYER PAUSE 8″